ARC

Create, mix and deliver with confidence

We’ve teamed up with Sonarworks to provide a 2 month free trial for SoundID Reference. Additionally, unlock exclusive discounts on any of the four SoundID Reference editions below when you upgrade to the full version. Access these benefits by registering any Audient or EVO product via ARC. Calibrate your headphones and speakers with SoundID Reference to trust every mixing decision. Works in all major DAWs as a plugin and as a standalone Systemwide app calibrating audio across your entire system with zero latency.

Valid From October 3rd 2023 – 2024
Click here for Full Terms & Conditions

Headphones | Headphones & Speakers |
Speakers & Headphones with Measurement Mic

2 month free trial with an exclusive 20% discount

Get an exclusive 20% off discount applicable to one of the three products listed above, which will be included in the trial when upgrading to the full version.

For Multichannel
(Includes setups up to 9.1.6)

2 month free trial with an exclusive 10% discount

Gain access to an exclusive 10% off discount to use
on SoundID Reference for Multichannel when
upgrading to the full version.

What is it

SoundID Reference is a standalone app and a DAW plugin that calibrates speakers and headphones to deliver an accurate studio reference sound.

For whom

Made for audio engineers, producers, musicians, DJs, composers, sound designers, game developers, and audiophiles.

What it does

SoundID Reference ensures perfect translation so you can create music that sounds great on phones, laptops, earbuds, or wherever else it’s played.

Results

By working with the same reference sound with your colleagues and clients, you can save time and money, no matter the distance or gear you have.

How does it work?

Even the best speakers can’t compensate for the acoustics of a poorly designed room. SoundID Reference compensates for that by measuring the frequency response of your room and speakers to create a calibration profile. For headphones – simply apply a pre-made calibration profile available in the software. With calibration applied, your music will sound great everywhere.

Before calibration

Calibrated

Level up your workflow with key features

Speaker and
headphone calibration

Accurate speaker measurements and calibration for headphones and stereo or multichannel setups. Over 400+ supported headphone models.

Save time with
translation check

Simulate a wide range of listening environments, from a car stereo to a high-end hi-fi system. This allows you to fine-tune your mix to sound great no matter where it’s being played.

Ability to control target
curve and modes

Make custom adjustments to the target curve in real time and manually select the frequency range that the calibration will be applied to.

 

Various target modes – select flat to set the frequency response target to be neutral across all frequencies, create your presets or work on Dolby Atmos music target curve.

Create, mix and deliver with confidence

We’ve teamed up with Sonarworks to provide a 2 month free trial for SoundID Reference. Additionally, unlock exclusive discounts on any of the four SoundID Reference editions below when you upgrade to the full version. Access these benefits by registering any Audient or EVO product via ARC. Calibrate your headphones and speakers with SoundID Reference to trust every mixing decision. Works in all major DAWs as a plugin and as a standalone Systemwide app calibrating audio across your entire system with zero latency.

Valid From October 3rd 2023 – 2024
Click here for Full Terms & Conditions

Headphones | Headphones & Speakers |
Speakers & Headphones with Measurement Mic

2 month free trial with an exclusive 20% discount

Get an exclusive 20% off discount applicable to one of the three products listed above, which will be included in the trial when upgrading to the full version.

For Multichannel
(Includes setups up to 9.1.6)

2 month free trial with an exclusive 10% discount

Gain access to an exclusive 10% off discount to use
on SoundID Reference for Multichannel when
upgrading to the full version.

How does it work?

Even the best speakers can’t compensate for the acoustics of a poorly designed room. SoundID Reference compensates for that by measuring the frequency response of your room and speakers to create a calibration profile. For headphones – simply apply a pre-made calibration profile available in the software. With calibration applied, your music will sound great everywhere.

Before calibration

Calibrated

Level up your workflow with key features

Speaker and
headphone calibration

Accurate speaker measurements and calibration for headphones and stereo or multichannel setups. Over 400+ supported headphone models.

Save time with
translation check

Simulate a wide range of listening environments, from a car stereo to a high-end hi-fi system. This allows you to fine-tune your mix to sound great no matter where it’s being played.

Ability to control target
curve and modes

Make custom adjustments to the target curve in real time and manually select the frequency range that the calibration will be applied to.

 

Various target modes – select flat to set the frequency response target to be neutral across all frequencies, create your presets or work on Dolby Atmos music target curve.

Already own an EVO product?

Redeem Now!

Buy EVO

Where To Buy